Programmatic Ads Reporting Advisor

A DSP will show you a thousand numbers and tell you nothing about which ones deserve your attention today. This advisor cuts through that. Give it your goal, objective, funnel focus, industry, and monthly budget, and it returns the programmatic reports that actually change a decision — ranked most to least important, mapped to the exact report in DV360, The Trade Desk, or Amazon DSP, and slotted into a daily, weekly, monthly, or volume-gated rhythm so you spend your time where it pays.

The reports that matter in programmatic fall into a rhythm, not a pile. Every day, check delivery and pacing, viewability, and invalid traffic — if your impressions are unseen or fraudulent, nothing downstream counts. Every week, judge creative and format performance, curate your inventory and domain lists, and watch frequency, because that is where most controllable waste and gains live. Every month, pull the segmented breakdowns — audience, supply-path optimization, working media ratio, attribution, deals — once they carry enough volume to trust. Which reports rank highest depends on your goal: a performance buy leans on attribution and working media, an awareness buy leans on viewability and frequency. This tool builds that ranked, cadenced plan for your exact setup.

The calculator

Programmatic Ads Reporting Advisor inputs and result

Reweights which reports rank highest.
The programmatic objective behind the buy.
Whole funnel, or zoom into one stage.
Tailors the emphasis to your model.For ecommerce and performance, lean on attribution, the working media ratio, and supply-path optimization — every fee and hop you remove shows up directly in CPA and ROAS.
Sets how granular your breakdowns can get.
✓ Moderate volume · Performance / conversion
Reports in your active rotation
14
0daily
0weekly
0monthly
Export
Your reports, ranked most to least important — with where each lives in the DSP and how often to pull it
#ReportStageWhere in the DSPCadence

Walkthrough

How to use this calculator

  1. Set your goal and objectivePick the outcome you are paid on and the programmatic objective behind the buy. The tool reweights every report to your goal and flags an objective that does not match it.
  2. Choose your funnel focusKeep the full funnel, or zoom into prospecting, consideration, or conversion. Zooming ranks that stage's reports to the top without hiding the others.
  3. Pick your industry and budgetIndustry tailors the emphasis; budget sets your volume, which decides how granular your breakdowns can get before they turn into noise.
  4. Read your ranked planWork down the priority table: each row names the report, the funnel stage, the exact place to find it in your DSP, and how often to pull it.
  5. Run the cadence and actFollow the daily, weekly, and monthly rotation below, watch for each report's signal, and take the action it points to. Export the plan and hand it to whoever trades the account.

From the desk

RGM Expert Says

Real Growth Matters — Programmatic & performance mediaHow we use this tool with clients

The most common way we see good programmatic budgets wasted is not bad targeting or weak creative; it is a trader drowning in DSP reports, refreshing the same CPA ten times a day and never pulling the viewability, fraud, or supply-path report that would tell them where the money actually goes. A DSP gives you near-infinite ways to slice the data, and almost none of them change a decision on any given day. The skill is knowing which three reports to read this morning and which can wait for the monthly review.

We run programmatic reporting as a rhythm, and that rhythm is built around quality first. Delivery, viewability, and invalid traffic get a daily glance because an unseen or fraudulent impression poisons every number beneath it. Creative, format, and inventory get a weekly working session because that is where the controllable money moves. The segmented breakdowns — audience, deals, supply paths, attribution — wait for the monthly review, because reading them before a line has cleared real volume means optimizing against noise, which is worse than not looking at all.

The reports almost no one runs, and the ones that separate amateurs from operators, are the supply-path and working-media reads. Two buyers can pay the same CPM and get wildly different value because one is buying through three reseller hops on unverified inventory and the other is buying direct and authorized. Reading the supply path and the working media ratio each month is how you find the fees and the fraud hiding between you and the publisher, and recovering that waste beats any bid tweak you will ever make.

The math

How it works

The advisor scores a library of programmatic reports against your goal, objective, funnel focus, and budget. Goal sets how much each funnel stage matters; funnel focus ranks your chosen stage up; budget maps to a volume tier that decides whether a segmented breakdown carries enough data to trust. Reports that pass are sorted into daily, weekly, and monthly cadences; reports that need more volume than your budget produces are held in an unlock list until you scale. The big number is how many reports sit in your active rotation.

Report priority = base importance × goal-stage weight × funnel-focus weight + goal adjustment
Volume tier = your monthly DSP budget mapped to thin / moderate / healthy / high bands
Cadence = the report's natural rhythm (daily / weekly / monthly), unless it needs more volume than your tier produces
Unlock list = breakdowns whose required volume tier is above your current budget tier
  • Volume tier — how much impression and conversion data your budget produces. It decides whether a segment-level breakdown is signal or noise.
  • Cadence — how often a report earns a look. Quality checks are daily, creative and inventory are weekly, segmented breakdowns are monthly. Reading something more often than it changes wastes attention.
  • Funnel focus — the stage you are optimizing. It reranks the list so a prospecting trader sees reach, viewability, and frequency first and a conversion trader sees attribution and working media first.

The priorities and cadence bands are RGM analysis — an expert playbook, not a DSP export. The viewability and invalid-traffic definitions follow IAB / MRC standards, and the report names follow standard DSP documentation (DV360, The Trade Desk, Amazon DSP). Treat the plan as a strong default and let your own results move the cadence.

Why it matters

Why a reporting rhythm beats a bigger dashboard

Almost every underperforming programmatic account we audit has the same problem in reverse: not too little data, but too much, read at the wrong frequency. Someone watches CPA hourly and panics at normal variance, then never once pulls the viewability or invalid-traffic report that would explain why half the budget bought nothing. A dashboard with forty metrics on it feels rigorous and changes nothing. A short, ranked rotation that tells you what to look at today, this week, and this month is what turns a DSP into decisions.

Cadence is really a volume question in disguise. A breakdown is only trustworthy once each segment inside it has cleared real impression and conversion volume. On a thin budget, slicing yesterday's results by audience, exchange, and region produces cells of pure noise, and acting on them makes the buy worse. That is why this tool holds segmented breakdowns back until your budget produces the volume to read them, and why it pushes them to a monthly window even then.

The reports also map to who should act. Pacing, viewability, fraud, and inventory are the trader's daily and weekly terrain. Creative and format performance are the marketer's weekly call. Attribution, incrementality, supply-path optimization, and the working media ratio belong to whoever owns measurement, because they are decision-grade reads that reward patience and punish twitchy reactions. Naming the owner next to each report is how a plan survives contact with a real team instead of everyone watching the same CPA and no one fixing the leak.

Benchmarks

Programmatic reporting cadence, at a glance

A quick reference for how often each kind of programmatic report earns a look, and why. The cadence bands are RGM analysis; the viewability and invalid-traffic standards follow IAB / MRC. Your own volume and results should fine-tune these.

Report typeRecommended cadenceWhy this rhythm
Delivery & pacingDailyA line that stalls or front-loads its flight costs you the same day you miss it.
Viewability (MRC)DailyYou pay the same CPM for an unseen impression; catch low viewability fast.
Invalid traffic / IVTDailyFraud is money handed to bots, and the leak compounds every hour you wait.
Creative & formatWeeklyA week is long enough to judge fatigue and short enough to act on it.
Inventory / placementsWeeklyCurating block and allow lists is where a spray becomes a real buy.
Audience / SPO / working mediaMonthlyNeed a full segment's worth of volume before they are trustworthy.
Attribution & incrementalityMonthly / quarterlyDecision-grade reads that reward patience over reaction.
Cadence bands are RGM analysis, directional only. Sources: IAB — standards & guidelines, Media Rating Council (MRC), and Google — Display & Video 360 Help.

Voices worth trusting

What disciplined programmatic buyers emphasize

A display impression counts as viewable only when at least half its pixels are in view for at least one continuous second — so judge what you bought by viewable impressions, not served ones.
viewability standard (paraphrase)
Every reseller hop between you and the publisher adds fees and fraud surface; read the supply path and prefer direct, authorized sellers before you chase a lower CPM.
RGM analysis
programmatic reporting playbook

Go deeper

Go deeper on programmatic measurement

Related on RGM

Keep learning

FAQ

Common questions

Which programmatic reports should I check every day?
Only the ones that corrupt every other number the moment they go wrong: delivery and pacing, viewability, and invalid traffic. Open the line-item view to confirm spend is pacing against the flight, check that your viewable rate holds against the MRC standard, and watch the invalid-traffic rate by exchange and domain. Everything else can wait for your weekly or monthly review, and checking it daily just invites you to overreact to normal variance.
How often should I pull creative and inventory reports?
Weekly. A week is long enough for the numbers to mean something and short enough that you can still act before fatigue and waste do real damage. In your weekly session, read creative and format performance (CTR, viewable CTR, VCR, cost per result) to cut losers and scale winners across display, video, CTV, and native, and read the inventory report to build block and allow lists from the domains and apps that earn or waste your spend.
Why does the tool lock some reports until my budget is higher?
Because a breakdown is only trustworthy once each segment inside it has cleared real impression and conversion volume. Slicing a handful of conversions by audience, deal, exchange, and region produces noise, not insight. On thinner budgets the tool holds those segmented reports — audience, supply-path optimization, incrementality — back so you do not optimize against randomness, then unlocks them as you scale into the volume that makes them readable.
How do the reports change for awareness versus performance goals?
The funnel stage you care about shifts the whole list. An awareness or reach goal pushes top-of-funnel reports up — viewability, reach, frequency, CPM, and video completion — because the job is efficient, seen, fresh exposure. A performance goal pushes bottom-of-funnel reports up — attribution, the working media ratio, supply-path optimization, and cost per acquisition — because the job is profitable conversion. The tool reweights every report the moment you change your goal or funnel focus.
What is the single most underused programmatic report?
The supply-path and working-media reads, side by side. Two buyers can pay the same CPM and get very different value because one buys direct and authorized while the other buys the same impression through several reseller hops, each skimming a fee. Reading the supply path and the share of spend that reaches actual media each month is how you find the fees and fraud hiding between you and the publisher, and recovering that waste beats any bid adjustment.
Does this work for DV360, The Trade Desk, and Amazon DSP?
Yes. The report names and locations here are generic across the major demand-side platforms — Google Display & Video 360, The Trade Desk, and Amazon DSP all expose delivery, viewability, invalid-traffic, inventory, audience, supply-path, and conversion reporting, even when they label them differently. The cadence and priority logic apply across display, video, CTV, and native, so the plan holds whichever DSP you trade in; only the exact menu path changes.

Related tools

Related tools